Moles are considered pests since they have the habit of digging into the ground causing damages on plant life while looking for food. They feed on grubs and other pests thus controlling their numbers and causing soil aeration. However, the major harm they bring is on the lawn since they build up hills. These hills are harmful to people especially kids since they are likely to get injured when playing. Hence consider the means below on how to trap a mole to get rid of them.
The first step would be to look for any molehills within the compound. Try to find any piles of fresh dirt since this is an indication the moles are around. Since the tunnels will always lead away from the tunnel, feel the grass which extends from it and sees if they are soft. This will help know the direction of the channel. In most cases, the pests will dig the subway along with things like fences or any barriers. Hence these would be the first place to look out for around the compound.
It is impossible to find the pest without checking if the channel is active. Hence it would be best for a person to verify there is any activity in the area. This cannot be attained by just looking at the tunnel. Thus take the time to collapse some section on either side. This will happen by pushing the side by either stepping on it or some tool. Then take some time before coming to look at the area. If there is any activity, the place will be raised or dug up again by the pest.
The next step is to use a gardening tool to expose a section where the trap will be set. However, before doing this, make sure to pack some dirt at the bottom in order to prevent the animal from digging underneath. Make sure to loosely put dirt to cover the channel back up in order to make it possible for the rodent to keep burrowing towards the passage. Since the earth will be loose, they will keep digging not until it is too late and they find themselves in the trick.
The next thing would be to put the trick on the exposed section but an individual has to determine which trick is best. They will vary from scissor to harpoon setups. Thus be sure to read the instructions carefully to ensure the apparatus are highly sensitive for an easy catch.
It is important for an individual to ensure there are no distractions within the areas surrounding the setup. Therefore, an effective covering must be used. This will protect it from any agents or distraction or light entry to minimize burrowing.
Maintain a regular check in the location to confirm whether the setup has captured the mole. In case of any failure, it is important for an individual to take into consideration to identify other locations.
After trapping the pest, an individual should consider appropriate ways to dispose of the dead animal. Thus ensure to have it properly sealed with the right material. Then dispose it into the trash to be safe.
The first step would be to look for any molehills within the compound. Try to find any piles of fresh dirt since this is an indication the moles are around. Since the tunnels will always lead away from the tunnel, feel the grass which extends from it and sees if they are soft. This will help know the direction of the channel. In most cases, the pests will dig the subway along with things like fences or any barriers. Hence these would be the first place to look out for around the compound.
It is impossible to find the pest without checking if the channel is active. Hence it would be best for a person to verify there is any activity in the area. This cannot be attained by just looking at the tunnel. Thus take the time to collapse some section on either side. This will happen by pushing the side by either stepping on it or some tool. Then take some time before coming to look at the area. If there is any activity, the place will be raised or dug up again by the pest.
The next step is to use a gardening tool to expose a section where the trap will be set. However, before doing this, make sure to pack some dirt at the bottom in order to prevent the animal from digging underneath. Make sure to loosely put dirt to cover the channel back up in order to make it possible for the rodent to keep burrowing towards the passage. Since the earth will be loose, they will keep digging not until it is too late and they find themselves in the trick.
The next thing would be to put the trick on the exposed section but an individual has to determine which trick is best. They will vary from scissor to harpoon setups. Thus be sure to read the instructions carefully to ensure the apparatus are highly sensitive for an easy catch.
It is important for an individual to ensure there are no distractions within the areas surrounding the setup. Therefore, an effective covering must be used. This will protect it from any agents or distraction or light entry to minimize burrowing.
Maintain a regular check in the location to confirm whether the setup has captured the mole. In case of any failure, it is important for an individual to take into consideration to identify other locations.
After trapping the pest, an individual should consider appropriate ways to dispose of the dead animal. Thus ensure to have it properly sealed with the right material. Then dispose it into the trash to be safe.
About the Author:
Learning how to trap a mole will help you keep your lawn in tip top condition. Take a look at our instructions online by clicking the link http://www.traplineproducts.com/trapinstructions.html.
No comments:
Post a Comment