g an

Safety Tips To Observe When Handling Asbestos Chicago

By Raymond Walker


Asbestos is of importance to manufacturing and construction works. This is because they help in fireproofing and in insulating among other uses. Apart from being of use, they pose health problems such as cancer when people are exposed to them for longer periods of time. To minimize these health risks then, the following safety tips need to be observed when handling Asbestos Chicago.

The major measure to consider is the use of breathing machines for the workers. The machines help the constructors to breath normally while wearing them and at the same time protect them from breathing in the dust from the asbestos. This is a preventive measure since the asbestos can cause harm to the health of the workers especially when they are exposed to such works for a long period.

Another precaution to observe is to avoid working on the dry noncombustible. In this case instead, the surfaces to be worked on the need to be kept wet by using water. The water assists in keeping the dust particles in contact hence preventing their escape to the other areas where they are not supposed to go. This is considered as a vital safety measure.

Using water sprayers with low pressure are recommendable. The ones with high pressure are used they scatter the offcuts and debris from asbestos instead of ensuring that they are thickened. This will cause a health hazard even to other people who are out of the working area. Tools that are abrasive need to be avoided too since they bring about an increase in the amount of dust produced.

Asbestos when poorly handled can cause a range of health problems including skin disorders and cancer among others. Due to this then, the constructors are advised that when they are done with their works, they should ensure they clean themselves. The hands must be thoroughly cleaned even if the gloves were used to ensure that there are no traces of these particles left.

In cases where the working is done outdoors, it is advisable that the doors and windows be closed to prevent entry of noncombustible fibers to the building. The air vents to the house should also be covered. Also, the contamination of the soil should be avoided by using the heavy plastic sheets. This will help to absorb dust that comes from the work area.

In instances where the working is to be undertaken in the houses, the inhabitants of these houses should be advised to stay far away from the location where the work is carried out. Further, still, the openings in the working place such as door and windows must be kept shut to avoid the spread of dust if they will be produced. While closing the internal openings, the externals should be left open to allow for air circulation.

After finishing the work, Make sure that any noncombustible cement residue in the work area and on the tools and equipment that were used are cleaned. For efficiency, this should be done using the wet rags and mops. Further still vacuum cleaners with high heat efficiency particulate air should be used. The workers should avoid contact with the equipment that cannot be cleaned such as brushes.




About the Author:



No comments:

Post a Comment